RC Helicopter Kyosho Caliber 30 (W/O engine ARF)

+ Spares --> + Upgrade --> + Accessories -->

RC  Helicopter Kyosho Caliber 30 (W/O engine ARF)

   The most impressive thing about this heli is the transmission. This is the first 30-class heli we know of to use belt drive for both the tail AND the main transmission. And it is the smoothest, least noisy transmission on any 30-50 size heli by a noticeable amount. The belt transmission also is pretty easy to set up compared to getting the gear mesh "perfect' on the pinion/gear arrangements. The other high points are significant also. The Caliber can - with no optional parts needed - be set up for ether mechanical OR electronic (CCPM) mixing. You will want to use CCPM if your radio allows it. The tail is a great design, with a dual pin slider that is pretty slop free - definitely better than the Raptor or Venture. The Caliber also is the only 30-50 class heli that includes as stock a boom mount for the tail servo. This has the undesirable side affect of making it very difficult to use a blade support for transport - be careful not to bend the TR pushrod or move the pushrod support when attaching the blade holder to the boom. The Caliber uses normal 30-sized blades instead of the tiny ones used on earlier Kysoho.


Specification:
Length: 43" (1095 mm)
Width: 7.5" (190 mm)
Height: 16" (408 mm)
Weight: 6.4 lbs (2900 g)
Main Rotor Diameter: 48.4" (1230 mm)
Tail Rotor Diameter: 9.4" (240 mm)

INCLUDED:
One Kyosho ARF Caliber 30 Helicopter kit. This is an almost ready to fly kit, so it will not fly without the required equipment listed below.

REQUIRED FOR COMPLETION:

• 6-channel heli radio w/5 servos
• Gyro
• Fuel
• Battery
• 6MM Hex Starter Shaft
• Electric Starter
• Silicone Exhaust Deflector